The ESP Guitar Company

I own an esp eclipse II thats got some semi serious fret buzz.... I raised the bridge to the brink of non playability and still have fret buzz... the only thing left i can think of is that the nut is set to low.... I have...

hello everybody so my ibanez iceman is messed up i have recently changed the strings and on the 15th fret high e there is a muffled 16th fret high e note so basically the 15th fret makes the 16th fret pitch and there is no...

Regarding these... -Output voltage (string/ strum) -Output noise -Output impedance -DC resistance what does any of that mean in terms of what you hear? like, what is the difference if the number in one pickup is higher...

Is there a chart that shows all the fretboard and neck specs of ESPs? I think it was posted awhile ago but I can't find it. Why doesn't ESP list the fretboard radius on their site?...

i have a Ibanez PGM100 and when i plug in and play there is little to no out put at all on it. The problem isnt the amp because it sounds fine on my M-II. ive tried replacing the pot and the sound is the same. any...

Is it possible for a bad ground wire to cause a P-up to sound kind thin and "tinny," and I mean the ground that goes to the bridge. I wouldnt think so if the neck P-up sounds fine. I've been messing with this JB in my V for...

I was changing my strings and I wanted to know how an EMG 85 would sound in the bridge. So I removed all my strings then I swapped my pickups. After putting new strings I started to play. At the beginning I was like : Wow...

i remember this being asked sometime ago, but anyways: Does changing tunings often from say C to E std affect the neck on a fixed bridge guitar? My guess is no, but what do you guys think?...

How will the intonation be affected playing a step down? Would it be a good idea to replace the earvana if you were planning on playing drop tunings exclusively?...

I know many of you have swapped old pickups out for emg actives. So, what i want to know is: 1. Can I do this manually? or am i going to have to bring it in to the local shop? 2. If i have to bring it in to the...

The string height at the 17th fret is 3.5mm, I think this is pretty high. What would be a good height for playing fast? Thanks...

hey i have guage 11-50 dr strings and i was wondering if it is possible to make it go from drop c to drop d with the fine tuners WITHOUT the floyd raising up...

I have a problem. When i use my floyd my a string goes super low, like after i release it. Ive been messing with it, and now the A is tuned down to an E. at first i thought my nut was loose, like the screw holding down the E...

I have a roland cube 30x and I like the distortion there's on it.... but can I mix this distortion with any pedal? cuz I want a anti-feedback pedal (can someone tell me where I can find this?) + the distortion of the amp but...

just a simple question... I have set-screw style knobs on my guitar, can I change them for some push-on? and how am I suppose to remove the set-screw ones?...