i know that in the EMG ZW set they give one emg 81 and one emg 85. i already own 2 emg 81 but want to buy an emg 85 too so i have the "ZW set" but then... where should i put the 85 for better forced harmonic? in the neck, or...

So, Mikey has just posted on his myspace blog about some new stuff from ESP. Since we all knew about the Randall sig amp, and it's been hinted at that his current ninjas will be put in production. Here's the...

I thought my eclipse came with a tone-pro's bridge but it's actually a tune-o-matic bridge. Anyways, I'm still thinking of changing the hareware out and was wondering what's the right bridge that comes on the eclipse?...

Hi folks! Have anyone ever made an (unmodified) H-1001 work fine for low tunnings? I just got a new one 1 month ago. Tried a lot of adjustments and advices given in several different threads in the forum, but no...

Hi, Is there someone who knowes the sizes of the neck (LTD M-100) I need the following information length: nut: bottom: thickness: scale: frets: radius: Hope someone can help me Maurice Elvader...

hey guys i just got a macbook but i need an audio interface it can be usb or firewire what do you guys recommend? thanks...

hi everyone, hopefully one of you can help me out: me an my band play in drop-c and our bassplayer plays a 5-string bass (scale length is 34 or 35). since most of our songs are played in d minor (and therefore easy to...

well let me tell you what i have first and then ill explain where i want to go. first right now i have emg 81, 1 vol, 1 tone, and pa-2. i just routed out a hole so i can put in a neck pickup. what i would like to do...

Hey does anyone here own/have played either an ESP Alexi Sawtooth/Scythe or the Edwards versions equipped with the MM-04 Preamp booster? I've always wondered how that mod sounds for that guitar....

I need to replace hardware on my guitar (the control knobs) and I'm not sure how to go about doing it without damaging them. They're the solid metal knobs that have the little 'center' hole on the side. I'm pretty sure...

I'm currently at my wits-end trying to intonate this damn thing. :mad: Here's the skinny: Tone Pros AVT II on the 'ol Santana SE Tuning to C Standard using Ernie Ball Not Even Slinkys (.012 - .056) Now I've...

I'm planning on installing coil taps for both pups (SD JB & 59) on my guitar, but I'm not sure what sort of push/pull pots I should get to replace the ones on my guitar (EC-1000). Any advice guys?...

Hey guys, I'm looking for a hardshell case to fit my ESP LTD F-255. I'm not sure whether the case they have FOR the LTD F-series will fit a 5 string. Any cases?...

Well...I have a odd problem! Two of my guitars make this horrible electic humming noise. One of them have passives the other one EMGzzz with 18V. The passive ones make this sound when its plugged in and is not touched upon....

does anyone know what keyboards these two bands use they sound the same and it want one...

Im lookin for some type of practice gear for when its late and quiet, I used to use an old rockman but dont know where I put it. Can anyone recommend anything that sounds decent clean and w/distortion, etc. and aint real...

Looking to do away with the distortion pedal and stick with rectoverb distortion. Was looking at either a hot plate or a weber attenuator, which one would better for my amp? What ohm do I need to get? I know your suppose...

Anyone have this? I'm getting one soon and was wondering what some of your personal recording experiences were with this device. Thanks!...

need some recommendations for ye ole XXX that needs retubing.. at least i think it's the tubes.. it plays great for about 5-10 minutes then the output drops for a few minutes then goes back up to the normal level.. does this...

Does anyone know what kind of maple Esp/ltd uses for their guitar bodies? Hard maple or Soft maple? or Species? I have a 2004 Made in Korea LTD KH-603 and after sending several e-mails to esp tech support and gettin no reply...

Hi, My guitar is now in the airbrush studio. I whant to change the inlays on the fretboard. I just need to know the size of the eye's of horus and the thickness. Does anybody know where I can find these. The person who...

can some one make me a razorback mockup with emgs black floyd black hardware and the black white purple coma (urban i think) and red black white and grey camo i really appreciate it...

I usually use D'Addarios on my guitars. Decided to try a set of Ernie ball strings and they sounded and felt great for about 5 days (playing 2 or 3 hours a day). The D'Addarios usually last for a few weeks at least. Has...

Hey anyone who owns one of these, can you give me an idea of the tone from it? Im usually used to and like the tone of mahogany ESPs but wanna get something different this time around. I used to have a black SRC signature,...

Its the one with the live wire pick ups (awesome). No strap buttons on this bad boy, there are 2 cavities with a drop in plastic sleeve with a screw at the bottom which are in the position that look like where I'd want my...

im planning on buying a overdrive pedal but im not sure which one to get. Ibanez TS-9 tube screamer Maxon OD-9 Ibanez TS-808 Maxon OD-808 BBE Green screamer any preferances? thanks....

http://www.musiciansfriend.com/product/ESP-LTD-MH103-Quilted-Maple-Electric-Guitar?sku=514872 They say the new MH-103's are set-neck.. LIARS! They're bolt-ons........

Looking for a new bass, thinking about either of these. I actually went into Sam Ash today looking for either a Ibanez SDGR900 or even a 4 string stringray. I played the 404SM at sam ash today, feels and sounds bad ass, but...

ok all my EMG 81 in the bridge of my Viper 100 went dead, i removed it and sent it back to EMG and they replaced it, i took it to a tech cuz i wasnt sure if a specific pup height was needed for the EMG and he snapped parts...

hi years ago i read that there is a little calculation to set up te tempo of a delay unit in order to sound perfet to the BPMs of a certain song it was like an equation.. can anybody help me? ;) thanx...