The ESP Guitar Company

For my birthday i wanna buy myself a new pedal. But idk which one should i get Boss TU-2 (tuner) or Boss NS-2 (noise suppressor) which one should i get?. And i was wondering how the NS-2 works. or any other pedal...

Gents, A few silly questions: 1. Do both the 81 and 85 run on separate batteries? I am assuming yes. 2. Can 4 batteries comfortably fit in the battery compartment? I want to goto the HW store and get a few 9V...

I've been hearing mixed comments regarding the extra tube that the plus has. Is it for the clean channel to make it more versatile or is it used in the lead channel for better gain? One guy had contacted Peavey and they said...

whoops, wrong forum. I posted it on the Equipment forum instead..Thanks!...

Gents, I have read about the X-bat external battery system but I had a simpler and cheaper alternative. Just buy an 18V power supply rated for at least 200 microamps, cut off the end and replace it with a 9V battery...

Does anyone know if it is simple to swap out the stock tuners on this guitar for Sperzel Locking (Blk), and change the bridge to Tonepros T3B-T and a T1Z Locking tailpiece? I want to know so when I buy this guitar, should I...

i'm about to buy a 2003 viper 305 bass, and i was just wondering if the 35 and 40 series pickups in it have the same measurements and if the newer models of those pickups would be compatible with the b64 active eq in the bass...

I'm most certainly buying a Tremoverb from someone of the forums. Now, I'll be needing a power converter to get the beast going where I live. Does anyone of you have any experience with using a converter on an amp? I've had...

i know that in the EMG ZW set they give one emg 81 and one emg 85. i already own 2 emg 81 but want to buy an emg 85 too so i have the "ZW set" but then... where should i put the 85 for better forced harmonic? in the neck, or...

So, Mikey has just posted on his myspace blog about some new stuff from ESP. Since we all knew about the Randall sig amp, and it's been hinted at that his current ninjas will be put in production. Here's the...

I thought my eclipse came with a tone-pro's bridge but it's actually a tune-o-matic bridge. Anyways, I'm still thinking of changing the hareware out and was wondering what's the right bridge that comes on the eclipse?...

Hi folks! Have anyone ever made an (unmodified) H-1001 work fine for low tunnings? I just got a new one 1 month ago. Tried a lot of adjustments and advices given in several different threads in the forum, but no...

Hi, Is there someone who knowes the sizes of the neck (LTD M-100) I need the following information length: nut: bottom: thickness: scale: frets: radius: Hope someone can help me Maurice Elvader...

hey guys i just got a macbook but i need an audio interface it can be usb or firewire what do you guys recommend? thanks...

hi everyone, hopefully one of you can help me out: me an my band play in drop-c and our bassplayer plays a 5-string bass (scale length is 34 or 35). since most of our songs are played in d minor (and therefore easy to...

well let me tell you what i have first and then ill explain where i want to go. first right now i have emg 81, 1 vol, 1 tone, and pa-2. i just routed out a hole so i can put in a neck pickup. what i would like to do...

Hey does anyone here own/have played either an ESP Alexi Sawtooth/Scythe or the Edwards versions equipped with the MM-04 Preamp booster? I've always wondered how that mod sounds for that guitar....

I need to replace hardware on my guitar (the control knobs) and I'm not sure how to go about doing it without damaging them. They're the solid metal knobs that have the little 'center' hole on the side. I'm pretty sure...

I'm currently at my wits-end trying to intonate this damn thing. :mad: Here's the skinny: Tone Pros AVT II on the 'ol Santana SE Tuning to C Standard using Ernie Ball Not Even Slinkys (.012 - .056) Now I've...

I'm planning on installing coil taps for both pups (SD JB & 59) on my guitar, but I'm not sure what sort of push/pull pots I should get to replace the ones on my guitar (EC-1000). Any advice guys?...

Hey guys, I'm looking for a hardshell case to fit my ESP LTD F-255. I'm not sure whether the case they have FOR the LTD F-series will fit a 5 string. Any cases?...

Well...I have a odd problem! Two of my guitars make this horrible electic humming noise. One of them have passives the other one EMGzzz with 18V. The passive ones make this sound when its plugged in and is not touched upon....

does anyone know what keyboards these two bands use they sound the same and it want one...

Im lookin for some type of practice gear for when its late and quiet, I used to use an old rockman but dont know where I put it. Can anyone recommend anything that sounds decent clean and w/distortion, etc. and aint real...

Looking to do away with the distortion pedal and stick with rectoverb distortion. Was looking at either a hot plate or a weber attenuator, which one would better for my amp? What ohm do I need to get? I know your suppose...

Anyone have this? I'm getting one soon and was wondering what some of your personal recording experiences were with this device. Thanks!...

need some recommendations for ye ole XXX that needs retubing.. at least i think it's the tubes.. it plays great for about 5-10 minutes then the output drops for a few minutes then goes back up to the normal level.. does this...

Does anyone know what kind of maple Esp/ltd uses for their guitar bodies? Hard maple or Soft maple? or Species? I have a 2004 Made in Korea LTD KH-603 and after sending several e-mails to esp tech support and gettin no reply...

Hi, My guitar is now in the airbrush studio. I whant to change the inlays on the fretboard. I just need to know the size of the eye's of horus and the thickness. Does anybody know where I can find these. The person who...

can some one make me a razorback mockup with emgs black floyd black hardware and the black white purple coma (urban i think) and red black white and grey camo i really appreciate it...