The ESP Guitar Company

Now there's a loud popping sound. I isolated it to the amp itself by disconnecting the rack and changing the instrument cable. I made sure the bias switch was changed over. What the hell is going on here?...

my neck pickup sounds weak and I think it might be set low, but im not sure. The owners manual only talks about bridge pickup height. I thought the neck one should be lower than the bridge one for balance. i have a EC500...

i just bought a killbutton and i need to route the hole on the guitar bigger. what should i use to route? thanks...

When recently setting up my ESP Standard Series Viper, I noticed that the truss rod was alot harder to turn than on my gibsons and PRS. Is this normal? Doe esp guitars have stiffer truss rods?...

Hi guys, I posted this on the older board but there was no clear answer on my problem so I'm gonna try it here again :) So I have a KH-2, which has a Floyd (duh :p) it's my first guitar with a Floyd... What I want to...

Hey All, I'm looking at replacing the pots, switches, etc. from my Korean guitars, and I'm curious to know where to find the best parts. Preferably from somewhere that will ship to New Zealand. Chur!...

Hi I recently purchased an MH 400 (10/21/07), love the sound and looks. When I got it from the store it had a slight bow in the wrong direction to the neck. I had the neck set up and intonation set up at a different store but...

have EC500 with 81/60emgs. Certain natural(open) harmonics just dont sound when using my 81. The specific harmonics that Ive noticed are on the 4th frets and 9th frets (19th maybe too). Few others sound weak but are...

Since this is my first post on this forum I should probably begin with saying hello. Hello. I recently bought a V-500 and want to change the somewhat crappy tune-o-matic bridge to a TonePros. But does anyone here know what...

im going to swap out my pickups but i want sumting crunchy and clean. i want to get like a fear factory sound type. i dont care if theyre active or not. i was thinking of getting the emg h4 with the PA-2 switch cuz someone...

So i've seen a few people have had a crack at the mm-04 in the alexis with the emg hz's and they're pretty shit hot. I'm interest in whether anyone has tried the mm-04 with actives at all? Also, has anyone experienced any...

Hi i was wondering if anyone installed a neck pickup on alexi guitar? i am just looking some advice if i should do it. The guitar shop in my town said they could do it, but i wonder if they can do a good job. is it worth it?...

Hi there. I'm trying to order some Graphtech graphite replacement saddles for my EC400AT and EC400VF guitars. Trouble is, they're at home and I'm at work, so I can't look at what's stamped on the bottom of the bridge to...

i have a problem with one of my guitars that has a floyd rose on it (original). I can't pull too much out of whammy bar because the tremolo block gets stuck against the body too soon. I get like 1.5 tone up out of my whammy...

anyone tell me or got that sheet of neck dimentions??...