The ESP Guitar Company

found these on a dutch selling site kh20 JH1...

Bad news is the trem is all fucked up and oxidated, greenish, pitted. Rest of the guitar is top notch, nice neck, no chips. In good condition they're usually around 300, how much would replacing the trem on it go for?...

Why is the general consensus that baritone scales are better for 7 strings? Is it because it allows you to reach a decent amount of tension with thinner strings, reducing muddiness (with higher tension) and easing playability...

Does anyone know which model tuning machine is used for the Horizon NT-7? All the website says is "Gotoh Magnum Lock".. Unfortunately for me, there are alot of Magnum Lock machines lol I'm changing my hardware to black/gold...

Hey all, I just picked up a Tech 21, VT Bass pedal for laying down bass tracks and it lists for power requirements: Use DC Power Supply only, -9v DC regulated or unregulated 100mA minimum; -2.1mm female plug center...

I'm looking to get my first looper pedal but I'm having trouble deciding from a few options. My budget is $150 but if you can convince me, I would consider going up to $200. I mention this because you probably know about a...

What is that translucent plastic strip that comes on ESP guitars placed between the strings and the fretboard intended for? Is it important for any reason or just to be aesthetic? Thanks...

I just wanted a couple opinions on these 2 amps I 've seen come up for sale, Bugera 6262-212 tube combo amp and a Peavey Valveking 100. I've read the Bugera is a cheaper version of the 5150 not sure how accurate this is...

I had got a brand new MXR Carbon Copy and when I arrived home I noticed that the REGEN knob is a little bit stiff from 7:00 to 11:00, becoming softer from 11:00 all way up -- similar to the other two knobs. After that, I...

Hey guy's. I'm kinda new here. I've been searching for a lot of info and it seems like I can always find an answer here. I ran into a little snag so I thought I'd try it out. I just bought an MX250II but the only way I could...

Maybe someone has an idea of what's going on... I have a Mesa Tremoverb - it's on the "modern high gain" channel, etc etc - with my Les Paul with passive pickups, it's very gainy - but with both of my guitars with EMGs (ESP...

Hi. A short time ago I bought a LTD EC 1000 left, but when I play about two songs it gets out of tune. What could be the problem? Will it be necessary to take it to the place where I bought it? I hope you help me, greetings...

Hi there I wonder if anyone can help. I bought this Les Paul Custom style guitar from a well respected importer of vintage Japanese guitars. I was told this was a limited 4 of 10 run for domestic Japanese client (#4 marked...

Original preproduction ESP Custom MV290 just like the one Kirk used during the Live Shit Binge and Purge era. This is the guitar that was given a bolt on neck and became the factory made KH1. Awesome guitar with the classic...

I had bought a LTD MH-1000 guitar from Reverb. But the guitar isn’t have the serial number. How to trace the number. And is it fake?...

                                                                                                hello everyone! i'm interested in buying this EC-1000 BLK secondhand, but not sure if its fake or not since it had a relatively...

I think it is time to replace the Nut on my MX250 and i would liek to replace it with an original . How and where can i order it? Has anyone experience with that?...

Hello all. Been trying to get a response from esp on this, but no response to my emails. So I'll try here. I am looking into getting an Edwards knight model. I have a friend in Japan who can order it. What I am wondering...

Technical (Electric guitar) question: What difference does the distance (gap) between the neck pickup and bridge pickup make on the tone/sound quality of the guitar?...

Anyone know if a can direct swap the factory EMG-ESP LH-300 pickups in a LTD EC200QM for a set of EMG HZ-H4? A friend has a set that I can have. Are both pickups quick connects? Thought that it would be easier before...

Anyone? I have some questions. Thanks!...

hello, i was thinking about using an old boss pedal, as a booster/preamp (especialy for solos). it's an old Boos hypermetal (HM3). it works fine on clean: level 70%, some lows and highs (50%), and dist 0 => it boosts...

First thing, does anyone have a KH-2 bolt on neck they want to sell? Second thing, does anyone have OR know where to find all the specs of this neck? Any help would be good....

Am looking to buy a EC what are the differences between the EC-I and the EC-II. Is the EC-I slightly rarer in some parts of the world?...

I'm thinking of selling one for 4699,- € shipping included. That is 1000,- € less than retail in Europe. Would anyone be interested? If the price is to high, what would you be willing to pay? Jay...

I just read this months "So What!?" - the Metallica fan club mag. Anyway, they asked Kirk's guitar tech his method of tuning, and he suggested looping the metal ball end through the tuner, then cutting the string short and...

Anyone know if the little blocks from an OFR will fit into a Licensed Floyd? I lost like two of them while restringing (d'oh!) and am probably going to have to order replacements from Stew-Mac. :mad:...

looking to upgrade a free fx 260. which nut should i go with earvana or bone? or...? i might even try making some out of the antlers i found in the yard... have done a bit of work on guitars, but no nut work, doesn't...

Kirk played a guitar i never seen. It is a white zombie guitar. Looks just like the dracula only another print on the body, inlays are the same (i think)...