ENGL Amp Spotlight: Invader II E642II

ENGL Amp Spotlight: Invader II E642II

Every serious musician gets to a point in life where it's time to stop compromising. Whether that means getting the guitar you've always dreamt of owning, or the recording rig you've always wished you had, there's a point in a person's life where you say, "I deserve to have the best," and in the case of amplifiers, the ENGL Invader II is almost certainly in the running for one of the greatest amps of all time.

The Invader II offers tone-sculpting flexibility that may be second to none. It starts with 16 -- yes, 16 -- sounds that are the base from which you can discover new worlds of sound. What are the sweet sixteen sounds? There are four channels, each with low and high gain modes, and then it adds ENGL's Sound switch that alters your tone based on your channel and gain settings. But hold on... you can use the optional SWM Z16 Sound Wizard Module with the Invader II, with 96 micro rocker switches, allowing you to comprehensively tweak your tones at any gain setting… a dream come true for all tone hunters! All this is controllable via MIDI, and with a 3-band EQ per channel, noise gate, and comprehensive connection options onboard, from clean chime to meaty crunch to brutal high-gain brutality, for literally every genre and style of music, there’s nothing the all-tube Invader II can’t do!

Features:
• 4 Channels: Clean, Crunch, Lead 1, Lead 2
• All Tube Head
• 2 Tube buffered FX Loops (each with Balance control)
• Noise Gate
• Master A/B
• Power Tube Monitor
• Connection Port for the optional ENGL Z16 Sound Wizard Module
• Ground Lift Switch
• MIDI: MIDI in / MIDI thru
• ENGL MIDI Foot Controller Phantom Power Switch
• MIDI Channel Assignment and Controller Enable Switches
• Write / Copy (for MIDI programming)
• All functions accessible on the front panel are MIDI programmable
• S.A.C.: Serial Amp Control

Sound Options:
• Sound
• Hi Gain
• Sound Wizard Module (optional)

Controls:
• Gain (for each Channel)
• 3-Band EQ (for each Channel)
• Volume (for each Channel)
• Presence
• Depth Punch
• Master A
• Master B
• Noise Gate Threshold Level
• Low / High Gain Volume Ratio Control (for each Channel)
• FX Loop I Balance
• FX Loop II Balance

Outputs:
• Poweramp Output (1 x 4 Ω, 1 x 8 Ω, 1 x 16 Ω, 2 x 8 Ω ||, 2 x 16 Ω ||) - Pre Output - Line Out

Footswitch: 
• Z4 (Channels)
• Z9 (Master A/B, Hi Gain, Noise Gate, Amp Mute, Sound, FX Loop)
• Z12
• Z15

Preamp Tubes:
• 4 x Engl ECC83 / 12AX7

Output Tubes:
• 4 x Engl EL34

Output Wattage: 
• 100 W

Dimensions:
28" x 10.6" x 11.4" (71 x 27 x 29 cm)

Weight:
49.6 lbs (22.5 kg)

ESP distributes ENGL amplifiers in the USA and Canada. Find a list of our ENGL dealers here!

Comments
dejaol s.

I enjoyed this application of you the impossible quiz

Darrel P.

Do you offer this ENGL in a 20 W or is it available for large venues only . Mr. Engl was responsible 

for the fuzz circuit and more found in my Randall EOD 88 . Damn I love that amp . ENGL AMP Heads ... yes please, all day long !