Cancel
A. Kolbin
A. Kolbin wrote

Is this model still manufactured in Korea? 

Reply
Dislike (0)
    Carl N.
    Carl N. wrote

    Hey Alexis, we are currently manufacturing this model in both Korea and Indonesia, hope this helps!

    Dislike (0)
      Turtle m.
      Turtle m. wrote

      What is the recommended pickup height settings for these guitars do I set them as close to the strings as possible like the standard emg pickups like my ec1000 or should they lower like typical non active pickups

      Reply
      Dislike (0)
        Carl N.
        Carl N. wrote

        Hey Turtle, active pickups can be set as close to the strings as possible, be careful not to set them too high as to hit the strings as they are played.  You can fret the instrument at the last fret and use this as a guide for setting your pickup height.

        Dislike (0)
          Turtle m.
          Turtle m. wrote

          Thanks is carl

          Dislike (0)
            robert k.
            robert k. wrote

            Can I order an esp neck for and Ltd guitar 

            Reply
            Dislike (0)
              Todd B. ESP
              Todd B. ESP wrote

              Hi robert, sorry we do not sell necks separately.

              Dislike (0)
                Matthew B.
                Matthew B. wrote

                Regarding the Iron Cross, does the pickguard cover any electronics cavities, or are all of those on the back of the guitar?

                Reply
                Dislike (0)
                  Todd B. ESP
                  Todd B. ESP wrote

                  Hi Matthew, All the electronics are contained within the cavities on the back side of guitar. There is nothing under the pickguard. I realize we have to update our photo, so we will get that back shot updated soon, thanks for bringing this to our attention.

                  Dislike (0)
                    Jim S.
                    Jim S. wrote

                    Bought this guitar a few months ago.  Love the way it plays and sounds.  My only complaint is the top toggle switch is just for looks.  Why isn't it hooked up?  My other questions is, and if I open up the back plates I would know this but I haven't opened it up yet, Is there a path drilled from the top toggle down to the other electronics so if I wanted to hook up the toggle I could?

                    Reply
                    Dislike (0)
                      Todd B. ESP
                      Todd B. ESP wrote

                      Hi Jim, We made this model exactly like James' original Iron Cross. Originally he took a LP and rewired it, removing the wiring for the original switch, and putting a switch in the control cavity, and making a master tone with 2 individual volume controls. So we include the extra switch in the regular "LP" position, but it is not wired. If you wanted to use it you could have it hooked up and disconnect the one in the electronics cavity. It should be ready to go if you wanted to do that.

                      Dislike (0)