Cancel
Christopher B.
Christopher B. wrote

Help!! The shaft on the push pull pot that controls coil split came completely out of the pot. 

 

I can replace it no problem. What kind of push pull pot do I need for replacement?

 

Thx, chris

Reply
Dislike (0)
    Carl N.
    Carl N. wrote

    You can reach out to our customer service team at customerservice@espguitars.com or https://www.espguitars.com/pages/support for assistance with your issue

    Dislike (0)
      Paul A.
      Paul A. wrote

      Hey same problem for me my toggle switch on the neck pup 95 % of the works. And i bought the ltd ec-1000t with Fishman pickups 

      And also i think they are faulty or cheap toggle switches. You can feel it when switching from bridge to neck.

      Gonna have to get a multimeter and pin point this stuff out.

      And i had some other issue. My bridge pup was installed backwards. The guitar was not 

      Properly setup (no biggie there, i always check my intonation, action, etc..)

      But seeing the bridge pup installed backwards kinda made m feel PISSED!

      Anybody has some help or issues or whatever my email is paul.g.arrigo@gmail.com 

       

       

       

       

      Reply
      Dislike (0)
        Carl N.
        Carl N. wrote

        If you need assistance our customer service team can be reached at customerservice@espguitars.com

        Dislike (0)
          Artem Z.
          Artem Z. wrote

          On the fifth day, the bridge pickup completely failed. When I opened the cover of the timbre block, I noticed that the individual contacts were poorly soldered. The contact from the neck-pickup on the volume potentiometer was held on two wires and broke off at the first touch. I never found the bridge sensor problem. Very disappointed.

          Reply
          Dislike (0)
            Carl N.
            Carl N. wrote

            You can reach out to our customer service team at customerservice@espguitars.com if you need assistance

            Dislike (0)
              James R.
              James R. wrote

              I am disappointed to find that I have a similar problem...Spent over $1000, and now after just a few days, a pickup is failing. I have to return it or get it fixed, due to a manufactuing flaw.  

              Dislike (0)
                Kirby O.
                Kirby O. wrote

                i'm curios to know what differentiations is approximately between this guitar and the standard ec models that have a thinner, solid body? I have back problems and actually purchased this guitar online but had to return it for other reasons but weight wise it was great

                Reply
                Dislike (0)
                  Carl N.
                  Carl N. wrote

                  It's about 10mm thinner, though if weight is a concern the weight between these instruments will generally be the same, but weight can vary from instrument to instrument so this might be something better for you to buy in person.

                  Dislike (0)
                    Santiago A.
                    Santiago A. wrote

                    I am looking for an e-ii in this finish. Can’t seem to find it. Does ESP still make them? If not, is it possible to get this ltd with seymour duncans?

                    Reply
                    Dislike (0)
                      Carl N.
                      Carl N. wrote

                      All of our models listed are offered with the specifications shown, unless you order a custom instrument there are not alternative options than what we have on our site.  This finish is only available on this model currently.

                      Dislike (0)