from my sketches

from my sketches

i draw/cad these from zero - not drawing above a photo - mostly i use the straight line tool and the 3-point curve tool - i haven't own an esp or any guitar so i learned about some measures a bit from searching and some are taken by my decision so what i draw is esp-style and not 100% copy but it can be printed at 100% and practically applied as 'diy - do it yourself' .. i use autodesk 360 fusion free license .. just for interest and entertainment and fun

Like (0) Dislike (0)

esp, m-ii

body boundaries

walidantar

0 Comments

6 String Ibby HM Guitar Bridge

walidantar

0 Comments

6 String Ibby HM Guitar Bridge ...

drawing esp-style headstock

walidantar

0 Comments

define the string spacing (1.5") & define the upper and lower overhangs (5/32", 5/32") starting from the line defining the nut which is considered (5/32 + 1.5 + 5/32) x 0.25" thick locate the point/position of the first...