new bridge and tail for EC-1000
Updated
I'm gonna be buying a used ec-1000 and i need some new gold hardware (bridge/tail) because the old stuff is worn out. So i'm wondering if gotoh stuff will fit the guitar? i don't wanna spend a ton of cash(maybe like 100$ at...
MORE »
Looking for a Bolt on concord head neck
Updated
Hi guys, I hope Im posting this is in the right place. Im looking to buy an ESP bolt on neck. Preferably a concord head and label "Horizon." I have a 1986 Horizon body that Id like to put together. Im not opposed to a non...
MORE »
Number of guitar
Updated
Hi LTD team, or else...
My kid just choosed an ltd mh 200 qm.
We ordered it in our favorite shop in our country but he asked me a small question that i could not answer to (this is obivously not acceptable as i am his...
MORE »
My kid just choosed an ltd mh 200 qm.
We ordered it in our favorite shop in our country but he asked me a small question that i could not answer to (this is obivously not acceptable as i am his...
Concerns about old ESP stratocaster
Updated
Hello, i have a old stratocaster which could be a ESP. The dealer says it's an ESP. The stratocaster was modified a bit. The dealer has equiped the quitar with a floyd rose on it.
It has no serial number on the back plate....
MORE »
ESP LTD-200
Updated
Hi there - looking for some help.
I have an old esp LTD-200, loved this guitar as a youngster. Now looking to sell but not sure what fair price is or if should just put on eBay or reverb? Thoughts welcome.
Serial...
MORE »
Serial...
Truss Rod hex size for older Maverick
Updated
Hello! I realize the manual says 4mm hex but the hex size of my truss rod is 5mm.
Any reason for the size difference? Thanks!!...
MORE »
Any reason for the size difference? Thanks!!...
Playing Powerslave Album - 2. 2 Minutes to midnight
Updated
Second installment of my challenge to play the full Powerslave album. Today one of the most mythical themes of the album 2 Minutes to midnight !!
https://www.youtube.com/watch?v=GPqTKRslDGw...
MORE »
https://www.youtube.com/watch?v=GPqTKRslDGw...
How do the older eclipse bolt-on necks compare to modern e-ii necks?
Updated
I played a great new e-ii recently, and it was the best playing guitar I've ever held. I'm wondering how the neck I played yesterday compares with what you'd find on a mid-90's bolt-on Eclipse. Does anyone have the neck...
MORE »
New For 2020 Emails
Updated
I signed up late for the emails, is there anyway i can get any emails sent out already?...
MORE »
Replacing my Floyd rose, routing?
Updated
im replacing my ESP LTD licensed Floyd rose with a Floyd rose special, will I need to do some routing?...
MORE »
Help me with serial numbers
Updated
Can someone help me discover the age of my Guitar?
I bought it used 10 year ago.
It's Japan made it still has the label made in Japan and its written on the tuners too.
It's an Explorer custom 22 keys....
MORE »
Esp arrow dark metal
Updated
Does the arrow dark metal come in lefty or would that have to be custom shop? ...
MORE »
Queensryche
Updated
I have an empire w I’m refinishing and I need a need tryryche not the white one the tarnish one...
MORE »
Cleaning the engineered hardwood fret board?
Updated
Hi There,
Is there a recommended product and method for cleaning the fretboard of an ESP LTD Viper 10 with an engineered hardwood?
...
MORE »
Extended Range Guiatrs
Updated
there should be more bartione 7 strings with floating trems...
MORE »
A good laugh for ESP/LTD Fans. (MV-100)
Updated
We just purchased a house and while packing, I forgot I still had my MV-100 from when I first started playing. So I dusted it off and cleaned it up. Thought I would post it here to share and give everyone a bit of a laugh,...
MORE »
What’s That Guitar?
Updated
So Metallica performed an acoustic cover of ‘Would?’ Yesterday to honor Alice in Chains. Now, when I was watching the performace I noticed a guitar I think I’ve never seen before. It’s most likely an explorer as it has the...
MORE »
Date of manufacture of the Bass Guitar Ltd F415
Updated
Hello, I bought a bass guitar Esp Ltd F-415fm, with the serial number IS19030553, I would like to know the date of manufacture of this instrument. Thank You!...
MORE »
ST-1 owners
Updated
Is the routing beneath the pick guard cut only for the HSS config or is it cut to allow for HH/HSH too?
On the verge of purchasing but would like to know ahead. Cheers...
MORE »
On the verge of purchasing but would like to know ahead. Cheers...
Wtb Zorlac
Updated
How’s it going guys, I was wondering if anyone is selling they’re mm270 89 zorlac...
MORE »
Neck plate “gasket”???
Updated
Did/has ESP ever released a bolt-on neck plate gasket for their odd shaped neck plate from the 90’s?...
MORE »
ESP M-II CTM
Updated
Hi. I'm looking for an ESP M-II CTM with black finish. When I go to the Japanese ESP site, there's no indication of whether the guitar has been discontinued or not. But I can't find it anywhere whatsoever, not even at the...
MORE »
Trade 1 of 1 Takada CS Alexi V for RS2 or SS Roope
Updated
Hey guys, is someone interested in trading an1 of 1 Takada CS Alexi V for a RS 1/2 or SS plus Cash. Maybe there is someone with the same showerthoughts haha...
MORE »
Looking for LTD KEA, RTL, MOP Guitars
Updated
Anyone looking to sell their LTD Kill em All, Ride the Lightning or Master of Puppets guitar?...
MORE »
Custom M-II
Updated
Hey everyone,
I wanted to order an M-II Custom similar to the one available in Japan: https://espguitars.co.jp/product/8445/
Is there a custom build sheet available that would match this guitar? The custom order form has a...
MORE »
Eii standard vs esp standard 2013. What is the difference?
Updated
Hello. I just bought an eii standard 2013. I've read about eii is re branded of esp standard. But in 2013 catalog they have this eii standard and esp standard. So im a bit confused. What are the differnce of this two way back...
MORE »
Body thickness on 401 vs 1000?
Updated
Anyone know if all ec 1000 have a thicker body than the 401? I know the ec1000t does..but curious about a regular 1000. Have a 401..but want one with a thicker body...seems like the 1001t might be a bit harsh on thickness....
MORE »