The ESP Guitar Company

Hey all, I'm about to acquire the Eclipse PL in black satin w/ chrome hardware, and wondered the manufacturer of the pickup rings? I might need to replace at least the bridge pickup ring due to noticeable wear. I suspect they...

I need some help setting up my guitars. Seem to know the methods but fail (or too scared) to implement. Most of my guitars have high action and get out of tune easily. I have the tools, I even bought a book (Dan Erlewine's)...

well im definitely a novice but i guess i play what i play much in the way i paint what i paint. Abstract, deep heavy chords, lots of delay, trails, reverb , overdrive etc. Im never gonna be an all out guitarist, guitar for...

I'm picking up a MH-1000 used for cheap because the previous owner didn't maintain it very well and am going to do a full hardware strip and replace, minus the frets and pickups. Which bridge, nut and tuners (pref locking)...

will the grovers fit perfectly on a non-reversed M headstock?...

I'm just wondering what my options are for replacing the pickups without routing. Anyone have experience with this guitar and fitting aftermarket pickups into it? I'll post a pic after it's cleaned up. Thanks....

I'm going around a bit in circles trying to figure out what would be the best option. I have two mavericks (mv-200 and mv-300). The mv-200 has a SD JB in the bridge and it sounds exactly how I want it to. The duncan...

I'm pretty sure these are discontinued, but does anyone know where I can get a brand new white MH-1000 with a floyd in Canada or northern US? I've seen a few youtube videos lately of people showing off their "new" white...

So i have a Horizon with Floyd Rose that i want to tune down from E standard to Db-Ab-Db-Gb-Bb-Eb, but go up a gauge in strings from the standard 9-42 to 10-46 - what is the best way to go about this, just change the strings...

i'm going to get an M-50 and put 3 chrome seth lover humbuckers in it with a 5 way blade switch. 1. i prefer the vintage tremolo now that i know how to make it stay in tune. 2. 22 frets allow me to fit 3 full humbuckers. 3....

Where can one sell a ESP guitar other than fleabay? Thanks......

Hey guys, I recently joined and thought I would stop by and say hello, got a question or two for you all. I am about to pull the trigger on a couple of ESPs- M-II w/EMGs and M-II Maple w/Duncans. My question is where would...

I'm planning on ordering an SC607B Stephen Carpenter guitar (in black) within the next few months so I have been doing lots of reading up on it to see what people say. I've been DYING to get this guitar for years now because...

Hi. Does anyone know how the pickup routing is done on the ESP LTD GL-256? For example, if the pick guard was removed, would there be one large cavity in the guitar body for all three pickups, or does each pickup have it's...

I recently purchased two guitars. The first being a black EC-1000T full thickness with no cutouts and 22 frets. I play mostly Zeppelin and blues so the plan was to swap the stock EMG's for a hot Gibson Burstbucker Pro...

I can't find shit on this guitar aside from standard, straight on shots. Anyone own one? Have pics? Anyone seen one in person? I'd like to know if the back of the neck is painted or satin. Maple/Alder, neck thru, SG style...

Hi everyone! I'm about to buy a brand new LTD EC 1000, but I have this doubt: the finish I'd like to get is Goldtop, but it has Alnico humbuckers. For what I want to play (rock/hard rock/a bit of not too heavy Metal),...

The beveled, flat top models. How well do they compare to the modern day EC-401's? I feel I may be beating a dead horse, but I'm trying to decide between one of the two. The EC-401 is the better looking one (Especially with...

when I was 12 I fell in love with metallica. now I want to buy my third guitar so what do you recommend to me. esp kh-3 spider esp kh-2 vintage esp kh-2 se greenburst ltd kh-2 se greenburst all second hand ...

This is my tele. It has faded since it was bought around 1989. It was purple when purchased and is still the same colour under the scratchplate. This is the guitar that i judge all other guitars by....

I am changing my EC-1000T over from EMG's to passive humbuckers. I need to replace the pots. I was thinking of switching from 2 volume pots/1 tone pot to 1 volume pot/2tone pots. I think that's the way it should come from the...

Hey guys, I am about to get a 2x12 cab. It is mono/stereo switchable using the input jack(s). The speakers are wired to each input jack and the jacks are connected to some sort of green circuit board. I assume that the...

I have a KUSTOM GROOVE 1200HD which puts out: 1200 Watts @ 2 Ohms 800 Watts @ 4 Ohms 500 Watts @ 8 Ohms My cabinet is a KUSTOM GROOVE G410H which can handle: 1000 Watts power handling 8 Ohms Impedance Now I...

Hi to everyone, i'm new of this forum, i'm from italy and i love esp. Now i Have a kelly hayes custom which is a fantastic guitar. I am also going to buy a 30th anniversary eclipse, The one with The dragons on bottom part of...

This is the bass rig I use during shows. I still have 4 rack spaces available so send your ideas my way: Kustom Groove 1200HD DBX 215s Dual EQ Behringer BTR2000 Rack Tuner Furman PL-PLUS Power Conditioner and Light...

Check 'em out...

I only ask because I see online people saying, "Don't think of ESP/LTD like Gibson to Epiphone or Fender to Squier, it's it's own thing." But no one really explains what that actually means? Is ESP not the parent company...

Hey everyone, first post. I recently discovered the LTD distressed series and seem to have contracted a bad case of gas over the EC 256 goldtop. I've never owned an LTD before but I've been playing over 20 years. I usually...

Hey everyone, new member here. I'm ordering my EC-1000 soon and still not too sure what effects pedal i should get. Watched several reviews on both and still not sure if the HD amp models on the HD300 would be better than...

Last week, both the slow blo fuses went on my amp. So I replaced them... twice. Each time.. it lasted about 1 minute before it fried them. 90 minutes ago, I brought the amp to my techs place. Dismantled it, all tubes...