ENGL Amp Spotlight: Invader II E642II

ENGL Amp Spotlight: Invader II E642II

There's an old saying in music and other parts of life: "less is more". But sometimes, it's actually more accurate to say that more is indeed more... and that's what you get from the ENGL Invader II, the follow-up to one of ENGL's most acclaimed amps of all time. 

If you’re on the hunt for peerless tones and variety, the Invader II gives you a flexibility that is second to none. A whopping number of 16 (yes, 16!) sounds are the base from which you can discover new worlds of sound. You can also use the optional Sound Wizard Module (SWM Z16) with the Invader II - a slot and connection port on the back of the amp that are ready for this purpose. Using the Z16’s 96 micro rocker switches, you can comprehensively tweak your tones at any gain setting... it’s a dream come true for all tone hunters! And if you’re wondering where the 16 "base" sounds come from: there are four channels, each with low and high gain modes (for a total of eight sounds), plus the Sound switch, which alters your tone based on your channel and gain settings. All this is, of course, controllable via MIDI, and with a 3-band EQ per channel, noise gate and comprehensive connection options on-board, there’s nothing the Invader II can’t do!

Features:
• 4 Channels: Clean, Crunch, Lead 1, Lead 2
• All Tube Head
• 2 Tube buffered FX Loops (each with Balance control)
• Noise Gate
• Master A/B
• Power Tube Monitor
• Connection Port for the optional ENGL Z16 Sound Wizzard Module
• Ground Lift Switch
• MIDI: MIDI in / MIDI thru
• Engl Midi-Footcontroller Phantom Power Switch
• MIDI Channel Assignment and Controller Enable Switches
• Write / Copy (for MIDI programming): all functions accessible on the front panel are MIDI programmable
• S.A.C.: Serial Amp Control

Sound Options:
• Sound
• Hi Gain
• Sound Wizard Module (optional)

Controls:
• Gain (for each Channel)
• 3-Band EQ (for each Channel)
• Volume (for each Channel)
• Presence
• Depth Punch
• Master A
• Master B
• Noise Gate Threshold Level
• Low / High Gain Volume Ratio Control (for each Channel)
• FX Loop I Balance
• FX Loop II Balance

Outputs:
• Poweramp Output (1 x 4 Ω, 1 x 8 Ω, 1 x 16 Ω, 2 x 8 Ω ||, 2 x 16 Ω ||) - Pre Output - Line Out
• Footswitch
• Z4 (Channels)
• Z9 (Master A/B, Hi Gain, Noise Gate, Amp Mute, Sound, FX Loop)
• Z12
• Z15

Preamp Tubes:
4 x Engl ECC83 / 12AX7

Output Tubes:
4 x Engl KT77

Output Wattage:
100 W

Dimensions:
28"x10.6"x11.4" (71 x 27 x 29 cm)

Weight:
49.6 lbs (22.5 kg)

ESP distributes ENGL amplifiers in the USA and Canada. Find a list of our ENGL dealers here!

Comments
Kane J.

Thanks for share this information, it's very useful with me
among us and run 3