The ESP Guitar Company

Has this guitar a "real"maple top or is it a veneer?

I have this model and its awesome! The neck, weight and Fishman Fluence pickups are versatile and have little or no hum at all. By far the best guitar I've had. 

Silly question, but I couldn't find this anywhere. Is it possible to have the neck pickup on voice 3 and the bridge pickup on voice 2 at the same time?

First I bought the Ephiphone Slash Appetite burst which looks similar to this one. I took it back and bought this one.  The build quality, especially the fretboard was better on the LTD like my others.  Glad I picked this up. It’s a classic.

Does this guitar come with stainless steel frets? Bought one from Sweetwater that was manufactured in July 2021. Serial Number: IW21071232

I have this guitar and it's basically my favorite finish on any of the Eclipse models including the EII and ESP ranges so I hope they keep it going. Mine came with a couple inconsistencies I noted in videos online of people with this model and that is the Switch and the Nut are black not cream but they are good quality. I do wish traditional thickness ECs had a slightly thicker neck profile instead of the same thin u. I think it's safe to assume a consumer buying something "Traditional Thickness" wouldn't be terribly upset if the neck profile was a bit more "traditional" too. I knew this when I got it though and It's not ultra thin to a point of feeling like it's fragile + it has a volute. 

This guitar it reminds me the Slash`s Gibson signature a little bit 

Great guitar, great fret job, finish and pickups, plays like butter.

Just got it and i love everything about this guitar !! BUT, the nut, for this high quality models you should at least offer graphite or Graphtech TUSQ

This is everything I’m looking for from an eclipse except one thing: the standard slim body with the belly cut. The color is one of my favorites offered at any level in ESP and/or LTD, 22-frets!, set through neck!, and the pickups! (Fishmans are not offered at the E-II level).

Please offer this exact guitar with the slim body that ESP is loved for!

Are the frets stainless steal?

Hi all. Just received my EC1000T. Its beautiful!

Im very pleased but...

Just wondered if I should have got any docs, leaflets, booklets or instructions on the use of the pick-ups, or what-not? AKA case candy?

There was nothing in the box apart from the guitar and 2 allen wrenches.

Can anyone help or advise me?

Thanks very much.

What is the recommended polish/wax for this guitar?

Can you easily switch the pickups with Fishman Fluence Modern or do you need additional work on the electronics?

Where is this guitar made? Is It Korea or somewhere else?

Help!! The shaft on the push pull pot that controls coil split came completely out of the pot. 

I can replace it no problem. What kind of push pull pot do I need for replacement?

Thx, chris

Hey same problem for me my toggle switch on the neck pup 95 % of the works. And i bought the ltd ec-1000t with Fishman pickups 

And also i think they are faulty or cheap toggle switches. You can feel it when switching from bridge to neck.

Gonna have to get a multimeter and pin point this stuff out.

And i had some other issue. My bridge pup was installed backwards. The guitar was not 

Properly setup (no biggie there, i always check my intonation, action, etc..)

But seeing the bridge pup installed backwards kinda made m feel PISSED!

Anybody has some help or issues or whatever my email is paul.g.arrigo@gmail.com 

On the fifth day, the bridge pickup completely failed. When I opened the cover of the timbre block, I noticed that the individual contacts were poorly soldered. The contact from the neck-pickup on the volume potentiometer was held on two wires and broke off at the first touch. I never found the bridge sensor problem. Very disappointed.

i'm curios to know what differentiations is approximately between this guitar and the standard ec models that have a thinner, solid body? I have back problems and actually purchased this guitar online but had to return it for other reasons but weight wise it was great

I am looking for an e-ii in this finish. Can’t seem to find it. Does ESP still make them? If not, is it possible to get this ltd with seymour duncans?