The ESP Guitar Company

How to repair? its possible to paint all my guitar? :(...

Hey Team! I happened upon a pretty dope V recently that has Alnico 5's, and I'm replacing them with Seymour Duncan Mick Thomson Blackout's. (beyond psyched). Only problem is... there is no wiring diagram anywhere for...

My gear is a ESP Eclipse I CTM and I wanna replace the EMG 81 85 with a Dimarzio passive. I know that I need to change the pots also with 500k, but which length should i take? Long shaft or short shaft? I only know that...

Hey guys, I am new to this forum, and already in need of some help   I own an LTD MH250, with EMG 81/85 ZW pickup set, running on 18V. Since I was pretty young when I modified the wiring, it was not really good soldered,...

Hello, I'm sorry if the problem has been resolved already, but I got a little pissed off at the locking nut on my M-II. ESP puts a Schaller R2 (~41mm wide) on these guitars, while the nut width is actually ~43mm (42,86). Not...

Hello all just want some opinions on my LTD GC-4. I don't care for the 35p4 paired with the MMTW so out of the 35DC and 35CS which would sound better with the MMTW?...

Hello everyone, I've got a eclipse i guitar (the one with 4 knobs) and i've lost the tool to adjust the neck. I can't find the correct tool in italy because it is not one of our standard (metric) so i have to buy it...

I got an ESP LTD Viper-400 recently from a friend and it's in really really bad shape. His brother fell on it and pushed one of the knobs into the guitar and bent one of the bridge pins. The hole he made where the knob was...

I just received a very used LTD viper 400 through guitar center and this sucker is all beat up. Chips, dents, scratches...which makes it easier for me to drill it for a pickguard since the finish is already jacked. But, there...

Please before breaking anything ...
Can anyone tell me if I should tighten (to correct underbow) right or left (looking from the red arrow). ...the ESP manual is not clear... Can I loosen the screw completely? or screw...

Hi folks! Have anyone ever made an (unmodified) H-1001 work fine for low tunnings? I just got a new one 1 month ago. Tried a lot of adjustments and advices given in several different threads in the forum, but no...

Hi, I've recently bought a LTD Viper 50 off eBay for a bargain price, it was in a pretty sorry state with many parts missing but everything seems to work ok, i've tested the pups and sourced most of the replacement parts I...

Hi folks, Do ESP answer technical support requests sent to them via their website, or do they tend to avoid direct contact with the end user, in that way that Ibanez seem to? Just concerned that I've submitted a couple of...

On my ST1 with the 5way in position 1 I'm getting sound when I tap on the neck pickup as well as the bridge. Normally just the bridge would be active. Is this right or wired incorrectly ?...

Hello there, I have just bought a brand new ESP Horizon NT-II and it came with 10-46 string gauge on it. I am playing on dropped C tuning and on the guitar i had before i was used to 10-52 string gauge that went perfectly...