routing question

Updated
Metalmilitia306
i just bought a killbutton and i need to route the hole on the guitar bigger. what should i use to route? thanks
riku

if you don't know how to make a hole bigger in a piece of wood then you probably shouldn't be trying it on a guitar.

TREVA

if you don't know how to make a hole bigger in a piece of wood then you probably shouldn't be trying it on a guitar.

:rollin:rollin:rollin:rollin:rollin

Bouncepogo

please posts pics of the results for maximum lulz

Pushead

Use a drill press (so you are sure to get a straight hole). Use a sharp drill bit and a high drill speed, this will help from chipping the finish. Go from the top of the guitar, as this will also help from chipping the finish.

Take your time, line up the bit before you start. If you need to make the hole a lot bigger, use drill bits in sizes in between the sizes instead of just making 1 big hole on the first try.

please posts pics of the results for maximum lulz

Weren't you the person complaining about the unhelpful nature of responses on the ESP board?

load more replies (1 of 1)
Metalmilitia306

thanks for the help. and laughs

Post to Thread