Pushead

Pushead replied to the forum post ESP MII

2014-09-30 13:59:35 UTC
Post pics.......MORE »
Pushead

Pushead replied to the forum post control layout

2014-09-29 13:55:53 UTC
Yes.  You would wire the output of each of the individual pots to a third pot.  It seems a bit redundant to me.......MORE »
Pushead

Pushead replied to the forum post Questions about early KH-2

2014-09-29 13:54:22 UTC
That's exactly what it is, an M-II Deluxe.  From around 92-93.  I have one as well, though my LFR was made by Kahler.......MORE »
Pushead

Pushead replied to the forum post WTB ESP MX-250 or ESP EXP

2014-09-23 17:03:11 UTC
You probably won't find an MX-II for that, but you should be able to find an EXP in that range.  Keep your eyes on ebay.......MORE »
Pushead

Pushead replied to the forum post WTB ESP MX-250 or ESP EXP

2014-09-23 15:37:07 UTC
What is your budget for the new guitar?......MORE »
Pushead

Pushead replied to the forum post new to esp wanting to know.

2014-09-23 03:18:05 UTC
Sounds like a fair trade.......MORE »
Pushead

Pushead replied to the forum post JH-1 measurements

2014-09-19 15:34:27 UTC
While not trying to ruin your (or his) fun, if he's never built a guitar or done much wood work before, it's probably cheaper to just save his pennies and buy one.  Tools and hardware are expensive, and first tries never......MORE »
Pushead

Pushead replied to the forum post so I did buy a new ltd....

2014-09-19 15:29:30 UTC
Hi Nate!  Teles are fun.  Haven't ever tried the LTD versions.......MORE »
Pushead

Pushead replied to the forum post This seem legit to you guys?

2014-09-19 12:38:04 UTC
It's an LTD M-50 with a paint job, black hardware and an "ESP Custom" sticker that he bought off e-bay.......MORE »
Pushead

Pushead replied to the forum post Is this ESP Eclipse II FR Genuine?

2014-09-19 12:36:26 UTC
It's an Eclipse 1.......MORE »
Pushead

Pushead replied to the forum post Is this ESP Eclipse II FR Genuine?

2014-09-16 15:00:56 UTC
Yes it's genuine.  ESP still makes 4 knob Eclipses (or did until at least 2012) for the non-US, Canada and Mexico regions.......MORE »
Pushead

Pushead replied to the forum post ESP MX250 AND MX220 Body thickness

2014-09-15 22:07:35 UTC
My 2003 MX-II is just a touch over 1.5" and my 1995 Gibson is nearly 1.625"......MORE »
Pushead

Pushead replied to the forum post topnut

2014-09-13 17:23:54 UTC
Well, string spacing is determined by the width of the nut, so again any competent luthier will be able to make a nut and set correct string spacing without a problem.......MORE »
Pushead

Pushead replied to the forum post topnut

2014-09-13 13:22:40 UTC
There's no particular reason to get a "stock" nut.  Find a competant luthier and have it made out of a better material than the stock one.  I prefer bone, but I've had graphtech ones in the past which are also nice.......MORE »
Pushead

Pushead replied to the forum post EC-1000T CTM FCSB Question?

2014-09-10 14:22:25 UTC
It's a veneer.  ESP's Facebook might confuse a wood veneer vs a vinyl veneer (like what Fender uses on their "photo flame" tops).  But in the cavity you'll see 1/16" layer of wood on top of the body wood.......MORE »
Pushead

Pushead replied to the forum post EC-1000T CTM FCSB Question?

2014-09-10 00:36:19 UTC
It's a veneer, though it might be over a maple top.  The old ESP standard had a plain maple section under the flamed/quilted veneer.  I don't have any experience with the LTD models, though.......MORE »
Pushead

Pushead replied to the forum post I'm calling it

2014-08-30 21:44:42 UTC
I'm upset that I never had a chance to get my free guitar lessons or my artist spotlight. ......MORE »
Pushead

Pushead liked the forum post I'm calling it

2014-08-30 21:43:53 UTC
Time of death 8/29/2014 1:51pm.......MORE »
Pushead

Pushead replied to the forum post New horizon, fret buzz!!

2014-08-30 13:41:02 UTC
Take it to someone.......MORE »
Pushead

Pushead replied to the forum post ST-213 high E too close to edge

2014-08-29 16:25:18 UTC
It sounds like a problem with the nut.  You should take the guitar to a technician and have them inspect it.  One of two things will happen: 1) They'll remove your current nut and slightly move it, or2) They'll......MORE »
vdubs75

vdubs75 liked the forum post Re: WTB esp or ltd mx250

2014-08-23 20:23:12 UTC
Pretty sure there is no LTD MX250. Or is there?The LTDs were bolt-ons called EXP 200...300 and so on. There was also a ESP EXP bolt-on.    The set-neck LTD was called the MX130.  It had a tune-o-matic......MORE »
Pushead

Pushead replied to the forum post Blah blah blah new EP

2014-08-19 14:04:23 UTC
I wonder how hard it is to get a song into the top 10 of Soundclick. http://www.soundclick.com/DaysBeneath......MORE »
Pushead

Pushead replied to the forum post Finished my band's first demo.

2014-08-19 02:09:10 UTC
Beer, the gift that keeps giving.  Or something.......MORE »
Pushead

Pushead replied to the forum post (Clips) Slate VS Superior Drummer

2014-08-19 01:58:14 UTC
Yes, more velocities from Slate would be great.  Every tom hit ends up being 90% or higher.......MORE »