Cancel
Richie K.
Richie K. wrote

I took a chance on the m-10 because it's almost a strat body copy.

I couldn't believe the quality when it arrived. The neck was perfect, and the frets seemed dressed.

To be honest it's better than my mim Strats.

Would have liked it to be a hard tail.

 

Reply
Dislike (0)
    Carl N.
    Carl N. wrote

    glad you like it, thanks for letting us know

    Dislike (0)
      Mike M.
      Mike M. wrote

      What do I look for when buying locking tuners for this guitar? Also is there a good replacement nut as the one it comes with is a bit rough? 

      Reply
      Dislike (0)
        Carl N.
        Carl N. wrote

        All aftermarket tuners are different so it might be best to have a local technician perform such a modification if you are unfamiliar with the process.  Depending on what aspect of your nut is rough this could be easily fixed without resorting to replacement.  A local technician should be able to assist you with that.  If you need further assistance you can reach our customer service department at customerservice@espguitars.com

        Dislike (0)
          Mark S.
          Mark S. wrote

          Was the Viper 50 considered higher quality than the Viper 10? Which model is now equivalent or closest to the Viper 50?

          Reply
          Dislike (0)
            Carl N.
            Carl N. wrote

            Yes, as the model number goes up so will the quality.  Most comparable will be the 200 series models currently offered

            Dislike (0)
              Sharifah Zarith Rahmah Bt
              Sharifah Zarith Rahmah Bt wrote

              Hey can anyone suggest me where i can fix my brokentoggle switch, I live in Malaysia, Johor, Thanks 

              Reply
              Dislike (0)
                Todd B. ESP
                Todd B. ESP wrote

                Hi Sharifah, This is something that any guitar repair person or repair shop can handle. Sometimes your switch is not broken. If it is intermittent, then sometimes spraying it with contact cleaner will fix the issue. But we recommend taking it to a repair person if possible. Check the dealer you purchased it from or the distributor in your country.

                 Here is a link to our distributor page: https://www.espguitars.com/locations?categories=intl-distributors   

                Dislike (0)
                  Sharifah Zarith Rahmah Bt
                  Sharifah Zarith Rahmah Bt wrote

                  The toggle actually broken because of mishandle the item, i went to local shop in my area but they do not have the parts, but i would look into the link. thanks 

                  Dislike (0)
                    Todd B. ESP
                    Todd B. ESP wrote

                    Hi Sharifah, Hope you get some help you need. As always it's best to contact the retailer you purchased the guitar from in case there were any issues with the delivery.

                    Dislike (0)
                      nuarharuha
                      nuarharuha wrote

                      Try google Promised Land Guitar Repair Center, area Taman Tun. They can do almost anything.

                      Dislike (0)
                        Todd B. ESP
                        Todd B. ESP wrote

                        Hi nuarharuha, thank you for that suggestion.

                        Dislike (1)
                          Gary M.
                          Gary M. wrote

                          I have a question, why does my guitar have the model viper 10 on the headstock rather then on the fretboard?

                          Reply
                          Dislike (0)
                            Todd B. ESP
                            Todd B. ESP wrote

                            Hi Gary, our website photo needs to be updated. Last year we changed over all our fingerboards. Now the model name is on the truss rod cover, not the 12th fret block like in the past.

                            Dislike (0)