KH2 (bolt on) vs Kamikaze neck measurements.

Updated
Tuborgmann

Hey there,

Does anone have the width of the 2 necks measured at the nut, at the 12th and at the 22nd fret

 

Thanks
Kenneth

Gary C.

The Kami is 45mm, 52mm and 56mm on mine.

The KH-2 is 42mm at the nut but i don't know the other sizes - maybe someone else can measure theirs for ya.

ESP 348

If no one helps, I will try and measure my KH2 bolt on for you asap Kenneth.

Guiguitarz

Can do this tonight for you 

Tuborgmann

Thanks guys

ESP Admin

Hey there,

Does anone have the width of the 2 necks measured at the nut, at the 12th and at the 22nd fret

 

Thanks
Kenneth

 

The requested dimensions for each model are listed below, however the measurement of width at the 12th fret is not a recorded item in our build records.
KH Nut: 42mm, Last Fret: 57mm
GL Nut: 45mm, Last Fret: 57mm

Tuborgmann

Thanks, i have never played a Kamikaze but have had my hands on a couple KH-2's and on those the nut may have been 42mm but the neck was slightly wider on both sides of the nut. How does that compare to your KH-2's?

Guiguitarz

So the KH-2 Bolt-On :                      Nut : 42mm, 12th : 53mm, 24th : 57mm

And my KH-2 Vintage (Neck-Thru) : Nut : 42mm, 12th : 52mm, 24th : 57mm (a bit thinner)

And a M-II Neck-Thru :                     Nut : 43mm, 12th : 53mm, 24th : 58mm (a bit wider)

Cheers,

G.

Tuborgmann

 Thanks a lot!

ESP 348

Great info G! Cheers mate.

Post to Thread