I recently purchased a used ESP Horizon FR27. The previous owner converted it to active pickups, Seymour Duncan Blackouts in both neck and bridge. What do I need to covert it back to stock?
Thanks!
PRICING AND SPECIFICATIONS SUBJECT TO CHANGE
Terms of Use | Privacy Policy | Contact Support
© Copyright 2024, The ESP Guitar Company, 5433 West San Fernando Road, Los Angeles, CA 90039 USA - PH: (800) 423-8388 - INTL: (818) 766-2097 - FAX: (818) 506-1378
Design by SilverFrog
Great question! There are a ton of options out there and a myriad of wiring configurations. We will stick to just a basic setup to point you in the right direction. As an example we will use the stock setup for this model, and assume you are to not re-use any of the parts that are currently installed.
You will need:
Neck: Seymour Duncan Hot Rails Bridge: Seymour Duncan Custom 5
1x B500k pot for volume
1x 500k Push/Push for tone and coil split*Or this could be replaced with a standard
A 500k pot for tone1x .022µF capacitor for tone pot
1x 3-way blade style switch
1x Mono output jack And some extra 24 gauge wire for ground connections, especially to the tremolo spring tree, and a jumper on the switch.
Feel free to contact our customer service department for a wiring diagram if you are interested in restoring the instrument back to the original specification.