ESP MM-04 To EMG HZ F H2

Mathew H.Mathew H.
Updated
    Mathew H.

    Does anyone have a wiring diagram for the esp MM04 to EMG hz?  I am replacing the Seymour Duncan blackout in my Edwards pinky to an EMG hz.  Thanks! 

    Dislike (0)
      Share
    Icefish
    Icefish wrote

    I dont have a diagram just remember going from active to passive pickups you will have to also change the pots and the jack as well. 

     

    EMG makes a conversion kit for the HZ pickups that looks like its a plug and go setup kinda like an active setup

     

    https://www.emgpickups.com/1-or-2-pickups-hz-passive.html

    Reply
    Dislike (0)
      Whiteknuckle Deathgrip
      Whiteknuckle Deathgrip wrote
      Icefish wrote:

      I dont have a diagram just remember going from active to passive pickups you will have to also change the pots and the jack as well. 

       

      EMG makes a conversion kit for the HZ pickups that looks like its a plug and go setup kinda like an active setup

       

      https://www.emgpickups.com/1-or-2-pickups-hz-passive.html

      The ESP MM-04 is an active preamp built around a 50k volume pot.

      OP will probably have to split the wire connecting to the pickup at one end. It's an easy job and he has around 50% chance of getting it right.

      The MM-04 comes with installation guide, so just follow that. Green wire connects to hot from pickup, ground connects to - you’ll probably figure it out

       

      Reply
      Dislike (0)
        C.J. R.
        C.J. R. wrote

        Im doing the same thing with an edwards pink model. How did you manage?

        Reply
        Dislike (0)
          Post to Thread

          Cancel