My ec1000 has the ESP brand tuners with the knob on them.
This is my first guitar with locking tuners.
The issue I am running into is with my low strings. I tune the 6th string to D but it will never tune properly. On the tuner it shows flat when I pick the string but the "wobbles" back and forth. It will not hold the note.
The A string is funky too. While tuning I get very close to the note and it stops tuning up. I turn it a bunch but it moves very little.
my suspicion is that I tightened the locking knob to much and crushed the string.
The E string sounds like a bad string, if when you pluck it and it "wobbles" a lot it is a bad string and shoud be replaced. It should not wobble and should remain consistant with the others. What brand string is it, just curious.
Is the A String slipping in the tuner?
Update on EC-1000.
New strings GHS Boomer David Gilmour sigs.
The A string is good now tines fine. The low E (Drop D) still doesn't tune in.
My suspicions are that
A) I once again overtightened the lock and crushed my bottom string
or B) The nut has been overfiled
thoughts and opinions please.
Crushing the string isn't likely an issue. The whole point of locking tuners is to hold the string tight. Depending on how hard you are picking the string, it's not uncommon for the note to wobble a bit. Try tuning using the neck pickup (which in my experience reads the note better while tuning). If you're still not quite getting it there, try fretting the note at the 2nd fret and tuning to E. If you can get a stable E at the second, see where the open string rings. That will be a clue that the problem might be at the nut.
Was it tuned differently before?
Maybe the slot at the nut is too low. Compare its string height at the nut or first fret to the other strings.
You could also have a bad machine head at that string.
And you said you wanted to learn stuff. Take a luthier class. Best guitar investment I've ever made.