• ammar

    EMG solderless system

    So my F-2005 volume pot was acting up, decided to re wire the guitar with the pots and output jack that came along the JH set. Did everything correctly but the signal was TOO weak. If I touched the guitar cable and pulled it up, the signal was normal. So I removed the jack and ensured that all connections are firm and the signal was fine again. However, I still feel that the guitar had more gain and volume before the switch, mind you I re stringed the guitar and put a new battery.....

    Can I cut off the quick connect terminals form the out pout jack wires and solder them? I am suspecting the output jack connections.....


  • Cancel