mm-04 wiring
mm-04 wiring
A little sloppy, but this should be where the various connections would go.
http://i240.photobucket.com/albums/ff122/jet1966/MM-042HB.jpg
If it has a 250k or 500k pot on the board (if the Alexi has a passive pickup) then that value will be a little different, of course. The rectangle with the question mark is a variable: If you are adding a tone pot, it would go there. I'm not sure what value that will need to be, or where to hook it up offhand. If you aren't using a tone pot, I'd put a ground lug in the body, and it serves two purposes: One, it makes it easier to tie all of your ground wires together, and by screwing it to the cavity, you are attaching to the cavity's shielding. (I'd try and use an interior side to lessen any chance of damaging the top or edge with a screw that is too long.) Secondly, this gives you a nice star ground, which will help cut down on potential ground loop hum.
And of course the number and color of the pickup wires may be different depending what you put in there, but that should show where the hots and grounds go.
I'm curious too, as I'm thinking of throwing an MM-04 in my SV...